KYBOY
New Member
Posts: 14
|
Post by KYBOY on Jul 16, 2005 23:09:32 GMT -5
which do you like better. 1/8 cable, 11 guage wire or drowning rods.?
|
|
ADC
Seasoned Veteran
Posts: 335
|
Post by ADC on Jul 17, 2005 12:13:00 GMT -5
You guys in KY drown beavers? HUH?
|
|
KYBOY
New Member
Posts: 14
|
Post by KYBOY on Jul 17, 2005 12:59:16 GMT -5
yea, can ya believe it ;D my main problem is that most of our trappin' is in creeks. it may be 20 feet wide and 8 inches deep or it may be 4 feet wide and 5 feet deep. ive used wire mostly because i can always make it the right lenght.
|
|
ADC
Seasoned Veteran
Posts: 335
|
Post by ADC on Jul 17, 2005 18:44:54 GMT -5
I don't know about you all down that way. ;D I almost never drown mine, though I may only trap 15-20 a year maximum and most years 10 or less. (low population in my area). If I set foot traps for them they are staked solid at the waters edge and have a 24-30" chain with plenty of swivels and I try to avoid anything for them to tangle in. It works well for me but if I were trapping hundreds a year I may think differently. I would think though that the 1/8 cable could be made adjustable for varying set conditions and would be more dependable and out last the wire by far. The rods to me seem cumbersome though in certain situations they would be just the ticket. All in all I'd say your hurting yourself if you trap lots of beaver and don't have at least a few of each type drowner at your disposal.
|
|
|
Post by BrianKRoberts on Jul 19, 2005 20:49:57 GMT -5
I drown quite a few Beaver each year and have used both wire ( No.9 and 11 gauge) and 1/8" cable, cable gets kinked badly after a use or 2 and is a pain to work with after that.
No.9 wire is a little stiff, I've settled on No.11 and never lost a Beaver with it, I do replace it as needed and most times just taking a foot or so of the end I fasten my bag to is enough as its really the only part thats stressed.....B.....
|
|